Second 'New Hardware" Wizard; Install The Usbstyx Driver - Texas Instruments ADS1299EEG-FE User Manual

Software Installation
3.3.1 Initial Launch of the ADS1299EEG FE Software
Launch ADS1299EEG FE software from the program menu. The software will load and begin downloading
firmware to the processor on data capture card (MMB0). Once the firmware is loaded and running, it will
cause the USB to re-enumerate.
Click Next
12
EEG Front-End Performance Demonstration Kit
Figure 11. Second 'New Hardware" Wizard
Figure 12. Install the USBStyx Driver
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
SLAU443 – May 2012
Submit Documentation Feedback