General; Safety; Device Concept; Scope Of Supply - Fronius RC Panel Pro Operating Instructions Manual

General

Safety

Incorrect operation and incorrectly performed work can cause serious injury and
damage to property.
All work listed in this document may only be performed by trained specialist personnel.
All functions described in this document may only be used by trained specialist person-
nel. All work and functions described may only be performed and used once the follow-
ing documents have been read and understood in full:
▶
▶

Device Concept

The remote control has the same functionality as the power source's control panel. A
precise description of the possible settings can be found in the power source's Operating
Instructions.
NOTE!
To be able to use the remote control, the welding system must have a TPS/i power
source.
NOTE!
Because of firmware updates, certain functions may be available that are not de-
scribed in these Operating Instructions or vice versa.

Scope of Supply

Technical data

WARNING!
This Document
All Operating Instructions for system components, especially the safety rules
Supply voltage
Protection class
Marks of conformity
(1) Remote control
(2) TPS/i Key Card
(3) This document
(1)
(2)
(3)
+ 24 V DC
IP 44
CE, FCC
3