Chapter 6 — Configure the Computer
About Bluetooth Communications
Connect a Bluetooth Device
The computer is Bluetooth-enabled, which lets you connect to other
You need to turn on the Bluetooth radio before you can discover and
connect to Bluetooth devices. By default, the radio is turned off.
The Bluetooth radio maintains its current state through a system reset. If
you perform a factory data reset, you must recreate pairings to devices.
The System bar icons indicate Bluetooth status.
To connect to a Bluetooth device, you must enable Bluetooth and then
select the device from a list of discovered devices.
1 Start the Settings app.
2 If Bluetooth is off, slide the Bluetooth switch on.
3 Tap Bluetooth. A list of available Bluetooth devices appears.
Dolphin CT50 and CT50h Mobile Computer User Guide