BRONKHORST u-FLOW Series Instruction Manual page 3

______________________________________
Warranty
Bronkhorst® products are warranted against defects in material and workmanship for a period of three years from the
date of shipment, provided they are used in accordance with the ordering specifications and not subject to abuse or
physical damage. Products that do not operate properly during this period may be repaired or replaced at no charge.
Repairs are normally warranted for one year or the balance of the original warranty, whichever is the longer.
See also section 9 (Guarantee) of the Conditions of sales:
www.bronkhorst.com/int/about/conditions-of-sales
The warranty includes all initial and latent defects, random failures, and indeterminable internal causes. It excludes failures
and damage caused by the customer, such as contamination, improper electrical hook-up, physical shock etc.
Re-conditioning of products primarily returned for warranty service that is partly or wholly judged non-warranty may be
charged for.
Bronkhorst High-Tech B.V. or affiliated company prepays outgoing freight charges when any part of the service is
performed under warranty, unless otherwise agreed upon beforehand. The costs of unstamped returns are added to the
repair invoice. Import and/or export charges as well as costs of foreign shipping methods and/or carriers are paid by the
customer.
Any liability is explicitly excluded for any secondary damage, caused by the instrument's failure or the malfunction of
any component. All wear parts, like seals for example, are also excluded from the warranty.
All devices are provided with a seal mark upon delivery. In case of a broken seal any warranty claims are void. The
opening of the instruments is only permitted by certified service personnel authorized by the Customer Service
Department (CSD) of Bronkhorst High-Tech B.V.
The products of other manufacturers are warranted for a period of one year unless otherwise mentioned.
General safety precautions
This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety
precautions required to avoid possible injury. Read the operating information carefully before using the product.
Before operating, make sure the line cord is connected to a properly grounded power receptacle. Inspect the connecting
cables for cracks or breaks before each use.
The equipment and accessories must be used in accordance with their specifications and operating instructions, otherwise
the safety of the equipment may be impaired.
Opening the equipment is not allowed. There are no user serviceable parts inside. In case of a defect please return the
equipment to Bronkhorst High-Tech B.V.
To maintain protection from electric shock and fire, replacement components must be obtained from Bronkhorst. Standard
fuses, with applicable national safety approvals, may be used if the rating and type are the same. Other components that
are not safety related may be obtained from other suppliers, as long as they are equivalent to the original component.
Selected parts should be obtained only through Bronkhorst, to maintain accuracy and functionality of the product. If you
are unsure about the relevance of a replacement component, contact your Bronkhorst representative for information.
________________________________________________________________________________________________
9.17.161 µ-FLOW & LIQUI-FLOW Instruction Manual L01, L13(I), L23(I), L13V12, L23V12
Bronkhorst ® ______________________________________
Page 3 of 50