Subscribe to Our Youtube Channel
Related Manuals for BRONKHORST MASS-STREAM D-641 Series
Summary of Contents for BRONKHORST MASS-STREAM D-641 Series
- Page 1 Quick Start Guide for mass flow meter & controller MASS-STREAM™ D-641x, D-642x, D-644x, D-646x D-646xA, D-647x, D-647xA D-648x, D-649x IMPORTANT! Read carefully before use. Keep for future reference.
-
Page 2: Safety First
▶ If in any doubt: scan the QR code (Service & Support) on the Notices for the user back cover to get in contact with Bronkhorst. The product requires professional experience and knowledge of installation, operational requirements of the relevant industry, and ▶... -
Page 3: Process Fluid
▶ If in any doubt: scan the QR code (Service & Support) on the product in a non-critical process. It guides the user in controlling back cover to get in contact with Bronkhorst. and monitoring research and pilot setups by means of The user is responsible for taking the necessary safety measures Bronkhorst FlowSuite. - Page 4 FLOW FLOW MASS-STREAM™ 1. Fluid inlet 5. Status LEDs 2. Display/buttons (optional) 6. Connector 3. Connector (optional) 7. Serial number label 4. Switch/Push button 8. Fluid outlet...
-
Page 5: Before Installation
5. Custom* ▶ Scan the QR code (Service & Support) on the back cover. 6. RX-RS232/BUS ▶ Go to the Bronkhorst website and select your operating 7. +Us (15 ... 24 Vdc) system to download Bronkhorst FlowSuite. For download 8. 0 V sense information, see the back cover of this manual. -
Page 6: Mounting Location
Mounting location To ensure reliable measurements, it is important to choose a correct mounting location. For optimal performance, observe the following guidelines: ▶ Install the product on a flat, rigid, and clean surface [1]. ▶ Avoid installation close to mechanical vibrations [2]. ▶... -
Page 7: Electrical Connection
Fluid line connection Electrical connection For basic setup, it is recommended to use Bronkhorst® CAUTION accessories (not included) as described in this manual. Risk of personal injury due to fluid leakage! ▶ Connect the product to the PC by using a T-part 8DIN/SubD-9 Unsuitable piping material and loose connectors can cable and USB converter. -
Page 8: Adjusting Zero Point
Adding the product to Bronkhorst FlowSuite When Bronkhorst FlowSuite is started, the software will automatically search for connected instruments. All found instruments are displayed in the left pane. ▶ Use the refresh option to check for newly connected products. If the product is not found, it may not be set to serial RS-232. - Page 9 Product status in Bronkhorst FlowSuite If a connection between the product and Bronkhorst FlowSuite In Bronkhorst FlowSuite, an icon is displayed next to the product cannot be established, the switch/push button can be used to in the left pane. The icon indicates the status of the product. When...
-
Page 10: Maintenance
Maintenance Technical specifications Although no routine maintenance is required, to ensure that the Description Unit Value product works correctly and safely, a regular (visual) inspection is Maximum fluid pressure bar(g) See serial number recommended. label Check prior to each use Permissible fluid temp. -
Page 11: Service And Support
(WEEE). Bronkhorst representative. Bronkhorst will take care of proper dismantling, recycling ▶ To help you quickly, make sure you have the serial number of and/or reuse. By ensuring this product is disposed of the product at hand. -
Page 12: Declaration Of Conformity
The full text of the applicable declarations of conformity are available at the following web address: https://www.bronkhorst.com/downloads. © 2024 Bronkhorst Instruments GmbH - All rights reserved Bronkhorst® is a registered trademark. All trademarks are the property of their respective owners. - Page 16 Bronkhorst Instruments GmbH +49 8166 9921 0 Am Ziegelwerk 1 info.bhi@bronkhorst.com D-85391 Leonhardsbuch, Germany www.bronkhorst.com Service & Support Bronkhorst FlowSuite Product Info 9.17.183A • 2024-01...
Need help?
Do you have a question about the MASS-STREAM D-641 Series and is the answer not in the manual?
Questions and answers