BRONKHORST EL-FLOW Select Series Quick Installation Manual
Thermal mass flow meters / controllers
Hide thumbs
Also See for EL-FLOW Select Series:
- Instruction manual (51 pages) ,
- Instruction manual (53 pages)
Related Manuals for BRONKHORST EL-FLOW Select Series
Summary of Contents for BRONKHORST EL-FLOW Select Series
- Page 1 Quick Installation Guide Doc. no.: 9.17.098 rev. C Date: 06-04-2020 Starting up EL-FLOW®Select in 10 steps...
- Page 2 9.16.118 The instrument manual and hook-up diagrams can be downloaded from the EL-FLOW® Select product pages on the Bronkhorst website: www.bronkhorst.com/products Other documents can be found on our general download page (www.bronkhorst.com/downloads) Starting up Check functional properties Before installing the instrument, check if the properties stated on the instrument label match your requirements: ...
- Page 3 Electrical connections must be made with standard cables or according to the applicable hook-up diagram (see page 2): EL-FLOW® Select instruments are powered with +15…24 Vdc. A. Analog connection B. Digital RS232 connection powered by plug in C. Fieldbus (e.g. DeviceNet™) power supply © 2020 Bronkhorst High-Tech B.V.
- Page 4 (this can be done while purging). Adjusting zero point The zero point of each Bronkhorst® flow meter is factory adjusted. If required, the zero point can be re-adjusted via RS232 or with the multifunctional switch. Procedure for adjustment with the multifunctional switch: ...
Need help?
Do you have a question about the EL-FLOW Select Series and is the answer not in the manual?
Questions and answers