To Program A Default Gateway Ip Address; To Program The Automatic Gain Control (Agc) And Automatic Level Control (Alc) Settings; To Restore Factory Defaults - ClearOne MAX IP Response Point Administrator's Manual

5. using the number keys, enter the desired subnet mask.
6. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming
mode.
7. the phone will reboot.

To Program a Default Gateway IP Address

1. press and hold
Note: dhCp must be disabled in order to change the subnet mask manually.
2. press 4 to enter the default Gateway ip Address menu. the current default gateway ip address will be
displayed.
3. press REDIAL/PROG. the current default gateway ip address will flash.
4. press and hold
5. using the number keys, enter the desired default gateway ip address.
6. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming
mode.
7. the phone will reboot.

To Program the Automatic Gain Control (AGC) and Automatic Level Control (ALC) Settings

1. press and hold the
2. press and hold the
3. press REDIAL/PROG. the current setting number will flash.
4. enter a new setting number using the table shown in figure 4.2.
5. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming
mode.

To Restore Factory Defaults

1. press and hold the
2. press and hold the
3. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming
mode.
4. the phone will reboot.
11 technical services: 800-283-5936
REDIAL/PROG until the program icon will appear on the lCd screen (see figure 4.1).
CLEAR to erase the current default gateway ip address.
REDIAL/PROG key until the program icon appears on the lCd screen (see figure 4.1).
8 key. the current AGC setting number will be displayed on the lCd screen.
setting speaker AGC
1 on
2 on
3 off
4 off
REDIAL/PROG key until the program icon will appear on the lCd screen (see figure 4.1).
9 key. the number 8 will repeat across the lCd screen.
microphone AlC
on
off
on
off
figure 4.2 mAX ip response point gain control table