Chapter 4: User Options; Programming Options; To Change Dynamic Host Configuration Protocol; (Dhcp) - ClearOne MAX IP Response Point Administrator's Manual

ChApter 4: user options

PROGRAMMING OPTIONS

to allow for individual preferences and enhance ease of use, the following features can be programmed:
dhCp , host ip , subnet mask, default gateway ip address, ringer melody, vlAn on/off, help line number, and
AGC/AlC. you can also restore factory defaults.
To Change Dynamic Host Configuration Protocol (DHCP)
1. press and hold the
2. press 1 to enter the dhCp menu. there are two options: 1 - enable dhCp; and 0 - disable dhCp .
3. press REDIAL/PROG. the current dhCp setting will flash.
4. press keys 1 or 0 to enable or disable dhCp .
5. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming.
6. the phone will reboot.

To Change Host IP Address

press and hold the REDIAL/PROG key until the program icon appears on the lCd screen (see figure 4.1).
Note: dhCp must be disabled in order to change the host ip address manually.
1. press 2 to enter the host ip Address menu. the current host ip address will be displayed.
2. press REDIAL/PROG. the current host ip address will flash.
3. press and hold
4. using the number keys, enter the desired host ip address.
5. press REDIAL/PROG to save the selection; a confirmation tone will play. press CLEAR to exit programming
mode.
6. the phone will reboot.

To Change Subnet Mask

1. press and hold the
Note: dhCp must be disabled in order to change the subnet mask manually.
2. press 3 to enter the Change subnet mask menu. the current subnet mask will be displayed
3. press REDIAL/PROG. the current subnet mask will flash.
4. press and hold
10 technical services: 800-283-5936
REDIAL/PROG key until the program icon appears on the lCd screen (see figure 4.1)
CLEAR to erase the current host ip address.
REDIAL/PROG key until the program icon appears on the lCd screen (see figure 4.1).
CLEAR to erase the current subnet mask.
figure 4.1 mAX ip response point lCd program icon