Huawei S1700 Series Manual page 89

S1700 Managed Series Ethernet Switches
Product Description
Table 5-17 Description of service port indicators in different modes (one indicator
for each port)
Display
Mode
Status
Speed
PoE
Power Supply Configuration
The S1720-10GW-PWR-2P has a built-in power module and does not support
pluggable power modules. The built-in power module can provide 124 W PoE
power, which ensures full PoE power on 8 ports in compliance with 802.3af or on
4 ports in compliance with 802.3at.
Heat Dissipation
The S1720-10GW-PWR-2P has no fans and uses natural heat dissipation.
Technical Specifications
Table 5-18
Issue 18 (2020-10-23)
Color Status
- Off
Green Steady on
Green Blinking
- Off
Green Steady on
Green Blinking
- Off
Green Steady on
Yellow Steady on
Yellow Blinking
Green Blinking
and green
yellow and
yellow
alternatel
y
lists technical specifications of the S1720-10GW-PWR-2P.
Copyright © Huawei Technologies Co., Ltd.
Description
The port is not connected or has been
shut down.
A link has been established on the port.
The port is sending or receiving data.
The port is not connected or has been
shut down.
The port is operating at 10/100 Mbit/s.
The port is operating at 1000 Mbit/s.
The port is not providing power to a PD.
The port is providing power to a PD.
The PoE function is disabled on the port.
The port stops providing PoE power
because of an exception (for example, an
incompatible PD is connected to the
port).
● The power of the PD exceeds the
maximum power or power threshold
of the port.
● The total power consumption of PDs
has reached the maximum power of
the switch.
● The manual power management
mode is used and the port is not
enabled to provide power to the PD.
5 Hardware Structure
55