Huawei S1700 Series Manual page 163

S1700 Managed Series Ethernet Switches
Product Description
Attribute
Maximum
transmission
distance
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and
receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission
speed. When a 1000BASE-X port uses a GE copper module, it can transmit and
receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
attributes of a 1000BASE-X port.
Table 5-40 Attributes of a 1000BASE-X port
Attribute
Connector type
Optical port
attributes
Standards
compliance
Console port
The console port is connected to a console for on-site configuration.
describes the attributes of the console port.
Table 5-41 Attributes of the console port
Attribute
Connector type
Standards
compliance
Working mode
Baud rate
ETH management port
You can connect a switch to a configuration terminal or network management
workstation through the ETH management port to configure the switch locally or
Issue 18 (2020-10-23)
Description
100 m
Description
LC/PC
Depend on the module used
IEEE802.3z
Description
RJ45
RS-232
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200
bit/s
Default value: 9600 bit/s
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Structure
Table 5-40 describes the
Table 5-41
129