Huawei S1700 Series Manual page 211

S1700 Managed Series Ethernet Switches
Product Description
No
.
8
Table 5-82 Description of service port indicators in different modes
Display Mode
Default mode
Speed
Issue 18 (2020-10-23)
Indic Name Color
ator
USB USB- -
based
deploym
ent
indicator
Green
Green
Yellow
Red
Color
-
Green
Green
-
Green
Green
Copyright © Huawei Technologies Co., Ltd.
Statu Description
s
Off ● No USB flash drive is connected to
the switch.
● The USB port is damaged.
● The indicator is damaged.
● The USB flash drive does not have
any configuration file and cannot
be used for deployment.
● The switch has been upgraded
using the USB flash drive and is
restarting.
Stead A USB-based deployment has been
y on completed.
Blinki The system is reading data from a
ng USB flash drive.
Stead The switch has copied all the required
y on files and completed the file check.
The USB flash drive can be removed
from the switch.
Blinki An error has occurred when the
ng system is executing the configuration
file or reading data from the USB
flash drive.
Status Description
Off The port is not connected or has
been shut down.
Steady A link has been established on
on the port.
Blinking The port is sending or receiving
data.
Off The port is not connected or has
been shut down.
Steady 10M/100M/1000M port: The port
on is operating at 10/100 Mbit/s.
Blinking 10M/100M/1000M port: The port
is operating at 1000 Mbit/s.
5 Hardware Structure
177