Huawei S1700 Series Manual page 162

S1700 Managed Series Ethernet Switches
Product Description
1
3
5
7
9
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at
10/100/1000 Mbit/s.
Ethernet electrical port.
Table 5-39 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector type
Standards
compliance
Working mode
Issue 18 (2020-10-23)
Twenty-four 10/100/1000BASE-T
ports
One console port
One USB port
Ground screw
AC power socket
Table 5-39
Description
RJ45
IEEE802.3, IEEE802.3u, IEEE802.3ab
10/100/1000 Mbit/s auto-sensing
Copyright © Huawei Technologies Co., Ltd.
2 Four 1000BASE-X ports
Applicable modules and cables:
● GE optical module
● GE-CWDM optical module
● GE-DWDM optical module
● GE copper transceiver module
4 One ETH management port
6 One RST button
NOTICE
If you hold down the Reset button for
at least 6 seconds, the switch restores
factory settings and then is reset.
If you press the Reset button, the
switch is reset.
Resetting the switch will cause service
interruption. Exercise caution when you
press the Reset button.
8 Jack reserved for AC power cable
locking strap
NOTE
The AC power cable locking strap is not
delivered with the switch.
- -
describes the attributes of a 10/100/1000BASE-T
5 Hardware Structure
128