Huawei S1700 Series Manual page 80

S1700 Managed Series Ethernet Switches
Product Description
3
5
Indicators
The S1720-10GW-2P does not have the PoE indicator. The meanings of other
indicators are the same as those on the S1720-10GW-PWR-2P.
Power Supply Configuration
The S1720-10GW-2P has a built-in power module and does not support pluggable
power modules.
Heat Dissipation
The S1720-10GW-2P has no fans and uses natural heat dissipation.
Technical Specifications
Table 5-14
Table 5-14 Technical specifications
Item
Memory (RAM)
Flash
Mean time
between failures
(MTBF)
Issue 18 (2020-10-23)
Two 1000BASE-X Ethernet ports
Applicable modules:
● GE optical module (the
maximum transmission distance
cannot exceed 40 km)
● GE copper transceiver module
● GPON optical module
(applicable in V200R012C00 and
later versions)
NOTE
If a port uses a GPON optical module,
other 1000BASE-X optical ports cannot
be used.
AC power socket
NOTE
It is used with an AC power cable.
lists technical specifications of the S1720-10GW-2P.
Description
512 MB
512 MB in total, 240 MB available for customers
23.8 years
Copyright © Huawei Technologies Co., Ltd.
4 Reset button
NOTICE
To restore the factory settings of a
switch, hold down the Reset button for
at least 6 seconds. This operation will
not reset the switch.
To reset a switch, press the Reset
button.
Resetting the switch will cause service
interruption. Exercise caution when you
press the Reset button.
6 Jack reserved for AC power cable
locking strap
NOTE
The AC power cable locking strap is not
delivered with the switch.
5 Hardware Structure
46