Huawei S1700 Series Manual page 177

S1700 Managed Series Ethernet Switches
Product Description
No
.
5
6
7
8
Issue 18 (2020-10-23)
Indic Name Color
ator
MO Mode -
DE switching
button
- Service Meanings of service port indicators vary in different
port modes. For details, see
indicator
L/A ETH port -
indicator
Green
Green
USB USB- -
based
deploym
ent
indicator
Green
Green
Copyright © Huawei Technologies Co., Ltd.
Statu Description
s
- ● When you press this button once,
the service port indicators change
to the speed mode and show the
speed of each service port.
● When you press this button a
second time, the service port
indicators change to the PoE mode
and show the PoE status of each
service port.
● When you press this button a third
time, the service port indicators
restore to the default mode and
show the connection status of each
service port.
If you do not press the MODE button
within 45 seconds, the service port
indicators restore to the default
mode. In this case, the SPEED and PoE
indicators are off.
Table
Off The ETH port is not connected.
Stead The ETH port is connected.
y on
Blinki The ETH port is sending or receiving
ng data.
Off ● No USB flash drive is connected to
the switch.
● The USB port is damaged.
● The indicator is damaged.
● The USB flash drive does not have
any configuration file and cannot
be used for deployment.
● The switch has been upgraded
using the USB flash drive and is
restarting.
Stead A USB-based deployment has been
y on completed.
Blinki The system is reading data from a
ng USB flash drive.
5 Hardware Structure
5-54.
143