Huawei S1700 Series Manual page 209

S1700 Managed Series Ethernet Switches
Product Description
Indicators
Figure 5-42 Indicators on an S1730S-H24T4S-A
2
3
Table 5-81 Description of indicators on an S1730S-H24T4S-A
No
.
1
2
Issue 18 (2020-10-23)
NO TE
Hold down the mode switch button for 6s and release it to start the web initial login mode.
Either of the following situations will occur:
● If the switch has no configuration file, the system attempts to enter the web initial
login mode. In this mode, the status of mode indicators is as follows:
● If the system enters the web initial login mode successfully, all mode indicators
turn green and stay on for a maximum of 10 minutes.
● If the system fails to enter the initial login mode, all mode indicators fast blink
for 10 seconds and then restore the default status.
● If the switch has a configuration file, the system cannot enter the web initial login
mode. In this case, all mode indicators fast blink for 10s, and then return to the
default states.
2 1 5
1 2 3 4
PWR
SYS
3
SPEED
4
MODE
CloudEngine S1730S-H24T4S-A
1 5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PWR
SYS
SPEED
MODE
CloudEngine S1730S-H24T4S-A
Indic Name
ator
PWR Power
indicator
SYS System
status
indicator
Copyright © Huawei Technologies Co., Ltd.
5
5 6 7
27 28
GE
5
17 18 19 20 21 22 23 24
25 26
Color Statu Description
s
- Off The switch is powered off.
Green Stead The switch is powered on.
y on
- Off The system is not running.
Green Fast The system is starting.
blinki
ng
Green Stead In the system startup preparation
y on phase, the SYS indicator is steady
green for no more than 30 seconds.
5 Hardware Structure
8 7 6
CONSOLE
ID
L/A
USB
ETH RST
8 7 6
CONSOLE
ID
L/A
USB
27 28 ETH RST
GE
175