Advertisement
82.
Attach Long Front and Rear Facia (3/4" x 3 1/2" x 78 3/4") to roof plywood and Outside Ridge
Cap edge with 10 - 1 1/2" finishing nails and 2 -1 1/2" screws. Use screws where Outside Ridge Cap
and Facia meet. Once again, Line Facia up so it is aligned with rafter ends. Do a dry run with Front,
Rear and Side Facia to confirm correct positioning prior to attaching.
83.
Attach remaining Side Facia to roof rafter ends as per Step 81.
84.
Attach Facia/Trim Detail Plates and Pentagon Plates to cover seams where Facia Trim pieces
come together. Secure each with 4 - 1 1/2" finishing nails.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
sales@outdoorlivingtoday.com
Page 33
Advertisement
