Download Print this page

OLT SunShed Greenhouse 8x12 Assembly Manual page 30

Plywood roof - t&g model

Advertisement

87" Rear Wall
Narrow Trim
71.
Attach remaining Narrow Wall Trims where wall panels come together and leave a seam.
Note: the Narrow Trim is 79" long on the Short Wall Side, 88" long on the Tall Wall Side, and 87" on
the Rear Wall. Align Side Trims tight underneath Soffit and Rafter. Attach with 8 - 1 1/2" finishing nails
per piece. Align and attach Rear Trim as per Door Trims in Step 70.
72.
Attach Door Hinges to Top and Bottom Dutch Door sections. Top Door has trim overhanging
door at bottom while bottom door has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2" & 3/4" black headed screws as shown above.
2" Black
Bottom Skirting
Screws
73.
Place Bottom Dutch Door panel into position.
Gap 3/8" on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2" black
headed screws. Use shim to help keep the door
evenly spaced on bottom. One of the extra roof
shingles (see parts list) can be used.
Toll Free 1-888-658-1658
3/8" gap at bottom.
Evenly spaced on
sides.
www.outdoorlivingtoday.com
2" Screws
3/4" screw
Top and Bottom
Hinges centered
on door trim.
Slight gap.Top Trim over-
laps bottom trim to prevent
water from getting in.
74.
Place the Top Dutch Door Panel into place
and gap top and bottom trims on the outside
about 1/8" apart. On the inside, horizontal door
frames should be about 1/4" apart. Use a shim
once again to help you. Attach hinges to trim
with 2" black headed screws provided.
Page 30
Middle Hinges
centered on trims.
Bottom Door Trim
sales@outdoorlivingtoday.com
1/4" gap on
inside.

Advertisement

loading

This manual is also suitable for:

8x12 sunshed greenhouseSunshed greenhouse building 8x12