Advertisement
29.
Locate and place Extender Wall on top of Door Header. Align so
framing lines up with framing of regular walls. When correctly in place, secure with 3 - 2 1/2" screws.
30.
Locate Rear Top Plate (3/4" x 2 1/2" x 73 3/4") and position on wall framing flush on inside. Align
so angle cut on 33 3/4 degree end is facing the high wall and 22 1/2 degree end is facing the short
wall.
Top Plates should be flush
with inside of wall framing.
31.
When properly positioned, attach by screwing down into top wall framing with 4 - 2" screws.
Toll Free 1-888-658-1658
Tip of 33 3/4 degree Top
Plate flush with wall framing
www.outdoorlivingtoday.com
Page 16
Flush to inside
of wall framing
22 1/2 degree angle
cut
end
follows
angle of wall.
sales@outdoorlivingtoday.com
2x3
Advertisement
