Cleaning The Accessories And Shelf Guides; Cleaning The Cooking Space; Replacing The Halogen Light Bulb - V-ZUG Combair V200 Manual

9 Care and maintenance
9.5

Cleaning the accessories and shelf guides

▪ The wire shelf and shelf guides can be cleaned in the dishwasher.
▪ The baking tray can be cleaned in the dishwasher; however, this will affect its non-
stick properties.
Removing and putting back the shelf guides
When inserting the shelf guides take care not to damage the enamel.
▸ Swing the shelf guide at the front into the
middle of the cooking space.
▸ Take the shelf guide out of the opening at the
back.
▸ Put back in reverse order.
9.6

Cleaning the cooking space

Incorrect handling can result in damage to the appliance!
Do not bend the cooking space temperature sensor or heating elements.
Do not scour the surface. This can damage the enamel.
▸ Remove any soiling from the cooking space while still hand warm. Use a soft cloth
dampened with water and a little washing-up liquid. Wipe dry with a soft cloth.
9.7

Replacing the halogen light bulb

WARNING: Risk of electric shock!
Disconnect the appliance from the mains power supply before replacing the halo-
gen light bulb.
Risk of burns from hot surfaces!
Allow the halogen light bulb and the appliance to cool down before replacing the
halogen light bulb.
Do not touch the halogen light bulb with bare hands. Instead, use a fine, dry,
grease-free cloth.
Overhead illumination
▸ Carefully turn the glass light cover 1 clockwise
and remove.
▸ Take out the faulty halogen light bulb.
▸ Carefully fit the new halogen light bulb.
▸ Turn the glass light cover 1 anti-clockwise to
tighten.
▸ Reconnect the power supply.
22
1