Replacing The Door Seal; Cleaning The Appliance Door - V-ZUG Combair V200 Manual

9.3

Replacing the door seal

Removing the door seal
▸ In each of the four corners, turn the seal out-
wards by about 30° and carefully pull the clip
out of the slot.
▸ When all four clips have been released, re-
move the seal.
▸ Clean the groove in the appliance with a damp
cloth.
Fitting the door seal
The joint X and vent hole must be at the bottom in the middle.
▸ Fit the seal starting in one of the corners at the
top.
▸ Insert the clip from the outside to the inside at
a 30° angle into the slot. Once the seal is fitted
at the top, insert the bottom two clips.
▸ Press the door seal into the groove all around,
i.e. at the top, bottom, left and right.
9.4

Cleaning the appliance door

▸ Clean the appliance door with a soft cloth dampened with water and a little washing-
up liquid.
▸ Dry with a soft cloth.
9 Care and maintenance
1.
3.
X
1.
3.
X
2.
4.
2.
4.
19