Operating The Appliance; Cooking Space Illumination; Selecting The Operating Mode; Selecting The Cooking Space Temperature - V-ZUG Combair V200 Manual

5

Operating the appliance

The and dials beside the operating panel are for operating the oven and the outer
and dials (if any) are for operating the hob.
5.1

Cooking space illumination

The cooking space illumination must be switched on manually.
▸ Turn the dial anti-clockwise to the
– The illumination is switched on.
The illumination remains switched on during operation. The illumination goes out
when the appliance is switched off.
5.2

Selecting the operating mode

▸ Turn the dial to the left or right for the required operating mode.
– The illumination is switched on.
Operating modes
Top/bottom heat
Top/bottom heat humid
Top/bottom heat eco
5.3

Selecting the cooking space temperature

▸ Turn the dial to the desired cooking space temperature.
– The and
– The cooking space is heated up.
As soon as the set temperature has been reached,
– the symbol goes out.
– the food can be placed in the cooking space.
5.4

Switching off

▸ Turn the dial to the «0» position.
– If there are no cooking zones switched on on the cooker, the
5.5

Removing the cooked food from the cooking space

Risk of burns!
Hot air may escape from the cooking space when the appliance door is opened.
The accessories get hot. Use protective gloves or oven cloths.
▸ Take the food out of the cooking space.
▸ To prevent corrosion, leave the appliance door open in the airing position until the
cooking space has cooled down.
symbols illuminate.
position.
Top heat
Bottom heat
5 Operating the appliance
symbol goes out.
13