User Settings; V-Zug-Home - V-ZUG Combair V200 Manual

7

User settings

The following setting can only be made in the Off operating state.
7.1

V-ZUG-Home

Switching on
▸ Turn the dial to the
▸ Turn the dial clockwise as far as it will go and hold in this end-stop position for at
least 3 seconds.
– The symbol flashes quickly.
– The connecting mode is active for 60 seconds.
▸ Connect the appliance to the home network within this time (see page 14).
– The symbol illuminates.
– The V-ZUG-Home operating mode is switched on.
Switching off
▸ Turn the dial to the
▸ Turn the dial clockwise as far as it will go and hold in this end-stop position for at
least 3 seconds.
– The symbol is no longer illuminated.
– The V-ZUG-Home operating mode is switched off.
Resetting to factory setting
▸ Turn the dial to the
▸ Turn the dial clockwise as far as it will go (until the end-stop).
▸ Turn the dial anti-clockwise to below «250 °C».
▸ Turn the dial clockwise as far as it will go (until the end-stop).
▸ Turn the dial anti-clockwise to below «250 °C».
▸ Turn the dial clockwise as far as it will go (until the end-stop).
– The symbol illuminates.
– The factory settings are reset.
The temperature selector must be turned to below 250 °C twice within 6 seconds.
App access
If an operating mode is ended via the app, the appliance switches off and the
flashes.
position.
position.
position.
7 User settings
symbol
15