Subscribe to Our Youtube Channel
Related Manuals for V-ZUG Combair V4000 60
Summary of Contents for V-ZUG Combair V4000 60
- Page 1 V-ZUG-Home Install the app, network your appliances and benefit from a wide range of useful functions. Operating instructions Combair V4000 Oven...
- Page 2 Validity These operating instructions apply to: Model designation Type Size system Combair V4000 60 C4T-21045 60-600 Combair V4000 60P C4T-21055 60-600 Variations depending on the model are noted in the text. © V-ZUG Ltd, CH-6302 Zug, 2022...
-
Page 3: Table Of Contents
4.14 Timer .............. 25 Assistance functions .......... 45 4.15 Illumination ............ 26 Date and time............ 45 4.16 Display lock ............ 26 V-ZUG Home ............ 46 4.17 Quiet mode ............ 26 7.10 Appliance information .......... 46 4.18 Time................ 27 7.11 Factory settings............. 46 4.19... - Page 4 Cleaning the baking tray ........ 47 Pyrolytic self-cleaning ......... 48 Cleaning the appliance door ...... 49 Cleaning the door seal ........ 51 Replacing the door seal ........ 52 Replacing the door seal (in pyrolytic appliances) ............ 52 Replacing the halogen light bulb ..... 53 8.10 Cleaning the accessories and shelf guides ... 54 Trouble-shooting 55 Error messages............ 55...
-
Page 5: Safety Precautions
Safety precautions Symbols used Cleaning and user mainten- ance shall not be undertaken Denotes important safety precau- tions. by children without supervi- Failure to observe said precautions sion. can result in injury or in damage to ▪ If an appliance is not the appliance or fittings! equipped with a mains cable Information and precautions that... -
Page 6: Instructions For Use
1 Safety precautions to touch the heating ele- ▪ For appliances with pyrolytic ments. Children under 8 self-cleaning: Excessive soil- years of age must be kept ing and any and all accessor- away from the appliance un- ies (tableware, baking trays, less they are constantly su- runners, shelf guides) must pervised. - Page 7 1 Safety precautions ▪ Ensure there are no foreign bodies or Correct use pets in the cooking space before clos- ▪ The appliance is designed for use in ing the appliance door. the home for preparing food. Under no ▪ For appliances with a grill: Keep the ap- circumstances flambé...
- Page 8 1 Safety precautions Caution: Risk of injury! ▪ Be careful not to put fingers in the door hinges, as there is otherwise a risk of injury if the appliance door is moved. Particular care should be taken when children are around. ▪...
-
Page 9: Using For The First Time
Using for the first time Before operating the newly installed appliance for the first time, the following steps should be taken: ▸ Remove packaging and transport materials as well as any protective blue film from out of the cooking space. ▸... -
Page 10: Appliance Description
3 Appliance description Appliance description Construction Operating and display elements Ventilation opening Door handle Appliance door Operating and display elements App view List view Favourite for bread Here is where you can make User settings all key settings and customize your appliance. EasyCook Function bars with function buttons CircleSlider... - Page 11 Right function buttons Step back Timer Start screen Cooking space illumination List view Display lock App view Quiet mode Switch off Clock V-ZUG-Home Ready to start Hot air 15min 13:21 Start Application Start operation Main value Setting options Options Operating time...
-
Page 12: Cooking Space
3 Appliance description Cooking space Using protective inserts or aluminium foil can damage the appliance. Do not place any protective insert or aluminium foil on the floor of the cooking space. Appliance door Socket for food probe Door seal Temperature sensor Cooking space illumination Cooking space ventilation Identification plate... - Page 13 3 Appliance description ▸ Ensure that the «sloped» side 1 of the baking tray is to the back of the cooking space. ▸ Only use the normal way round – not upside down. Wire shelf If you are using your oven in combination with a Steamer: Do not use the wire shelf from the oven in the steamer! Risk of rusting! The wire shelf from the Steamer is distinguished through a metal plate with a steam symbol.
-
Page 14: Operation
4 Operation Operation Operating the display Switching the appliance on The appliance is operated using the display. The clock is only visible in EcoStandby if enabled in the user settings. ▸ Long touch the display. – The start screen appears. Changing the start screen view The start screen can be displayed in one of two ways: as an app view (see page 10) or as a list view. -
Page 15: Selecting And Starting An Application
4 Operation Expanding the right function bar The right function bar can be expanded at any time. ▸ Drag the bar 3 to the left. – The function bar expands. – More functions appear in the display. Using the CircleSlider ▸... - Page 16 4 Operation Selecting an application ▸ Select the desired application using the CircleSlider. – Choose an item in the list by swiping, navigating and touching it. ▸ Touch the desired application and press «OK» or touch the application again. – The ready to start screen or another submenu with more applications appears in the display.
-
Page 17: Changing An Application
4 Operation Changing an application If an application has not started yet: ▸ Touch the «Start screen» function button. – The start screen appears (see page 15). – A new application can be selected. If an application is already running: ▸... -
Page 18: Delayed Start / End
4 Operation Showing the clock during operation The clock and operating time can be shown during operation. ▸ Expand the function bar. ▸ Touch the «Clock» function button. – The clock and operating time are shown in the display. Hiding the clock during operation ▸... -
Page 19: Food Probe Temperature
4 Operation Example ▸ Select the «Hot air» application and 180 °C. ▸ At 8:00, set an operating time of 1 hour and 15 minutes. ▸ Set the end time to 11:30. – The appliance switches on automatically at 10:15 and off again at 11:30. Food probe temperature Only use the food probe supplied. -
Page 20: Options
4 Operation Measuring the food probe temperature To measure the food probe temperature only and without operation stopping automatic- ally when the target temperature is reached, proceed as follows: ▸ Select the desired application (see page 15). ▸ Plug in the food probe. ▸... -
Page 21: Checking And Changing The Settings
4 Operation Checking and changing the settings Values and settings can be changed before and during operation. Exceptions are setting the end time during operation (see page 28) and preheating (see page 21). Only the operating time can be set for Sabbath applications. Values and settings cannot be changed during operation. -
Page 22: Setting To Start Later
4 Operation 4.10 Setting to start later With «Start later», an application and its settings can be predefined and set to start at a later time. The application does not start automatically, but instead only through the inter- action of the user. The appliance remains ready to start and does not switch back to EcoStandby. -
Page 23: Favourites
4 Operation 4.12 Favourites Creating a favourite Favourites can be created from all applications, with the exception of the cleaning pro- grammes. And all options, with the exception of «End», can be saved. Up to 50 favour- ites in total can be created. ▸... -
Page 24: Pinning
4 Operation Deleting favourites The favourite can only be deleted in the app view. ▸ If required, touch – The start screen appears as an app view. ▸ Press and hold the favourite 1. – Quick information appears above the app. ▸... -
Page 25: Timer
4 Operation 4.14 Timer The timer functions like an egg timer. It can be used independently of other functions and applications. Setting and starting the timer ▸ Touch the «Timer» function button in the right function bar. – The timer is shown in the display. –... -
Page 26: Illumination
4 Operation 4.15 Illumination The cooking space illumination can be switched on and off at any time. The cooking space illumination switches on automatically 3 minutes before the set duration is up. If the cooking space illumination is turned either on or off when a Sabbath applica- tion is started it will remain unchanged until the end of operation. -
Page 27: Time
4 Operation Turning off the quiet mode ▸ Expand the function bar. ▸ Touch the «Quiet mode» function button. – The quiet mode is shown in the display. ▸ Touch the «Quiet mode» switch. – «Quiet mode» is turned off. –... -
Page 28: End Of Operation
4 Operation If the application has been running for less than 1 minute when cancelled, the ready to start screen appears. Sabbath applications can only be cancelled using the function button (see page 34). Ending an application before time ▸ Press and hold the function button. -
Page 29: Subsequent Steps
4 Operation 4.21 Subsequent steps Subsequent steps are applications that can be used to continue operation after an ap- plication has ended or been cancelled. They are used, for example, to brown food off. The selection of subsequent steps available depends on the application that has just ended or been cancelled. -
Page 30: Appliance Tips
5 Applications Display after switching off Depending on the application and settings, the following is shown in the darkened dis- play. – The residual heat and the temperature if it is above 80 °C. – The food probe temperature if the food probe is still plugged in. 4.23 Appliance tips Appliance tips provides tips on operating the appliance by topic. -
Page 31: Top/Bottom Heat Humid
5 Applications Top/Bottom heat humid Temperature range 30–250 °C Recommended value 200 °C Level The cooking space is heated by the top and bottom heating elements. The natural hu- midity produced is largely retained in the cooking space. The food retains its moisture. Uses ▪... -
Page 32: Pizzaplus
5 Applications Uses ▪ Finish off baking ▪ Preserving, bottling Use a dark enamelled tray or a black tray or tin for crispy results. PizzaPlus Temperature range 30–280 °C Temperature range for pyrolytic 30–300 °C appliance Recommended value 200 °C Level The cooking space is heated by hot air and bottom heat. -
Page 33: Grill-Forced Convection
5 Applications Grill-forced convection Temperature range 30–280 °C Temperature range for pyrolytic 30–300 °C appliance Recommended value 200 °C Level 2 or 3 The cooking space is heated by the grill element. The hot air fan distributes the air evenly in the cooking space. Uses ▪... -
Page 34: Hot Air Eco
5 Applications Uses ▪ For savouries and biscuits on two levels at the same time ▪ For yeast pastries and bread on two levels at the same time ▪ Gratins and baked dishes Select a lower temperature (reduce by approximately 20 °C) than for as the heat transfer is more efficient. - Page 35 ▪ Do not leave food in the appliance for too long before use. The timer and heatable appliance drawer cannot be operated at the same time. They are turned off when the application is started. V-ZUG-Home is not available during operation.
-
Page 36: Soft Roasting
5 Applications Sabbath top/bottom heat Temperature range 30–140 °C Recommended value 85 °C Level The cooking space is heated by the top and bottom heating elements. Uses ▪ For heating up or keeping pre-cooked, crispy food and bakery goods warm on one level ▪... - Page 37 5 Applications Soft roasting table for «Soft roasting seared» Cut of meat Degree of Recommended target doneness temperature °C Fillet of veal medium well done Rump or loin of veal medium well done Shoulder of veal well done Neck of veal well done Veal topside medium...
- Page 38 5 Applications The meat can also be browned after cooking. This has little effect on the degree of doneness of large cuts of meat. For small cuts of meat, the target temperature should be reduced by 2–3 °C. ▸ Insert the food probe into the meat so that the tip is in the centre of the thickest part. For a correct food probe temperature reading, the food probe must as far as pos- sible be fully inserted into the centre of the food.
-
Page 39: Keep Warm
5 Applications Cancelling / ending soft roasting before time ▸ Press and hold «Stop» to cancel soft roasting. – The following appears in the display: «Do you really want to cancel the applica- tion?» ▸ To cancel or turn off soft roasting before time, touch «Yes». - Page 40 5 Applications Starting a recipe For recipes that do not require preheating, place the food in the cold cooking space. ▸ Long touch the display. – The start screen appears. ▸ Select the «Recipes» application group and confirm with «OK», if required (see page 15).
-
Page 41: Easycook
5 Applications While the recipe is running While the recipe is running, it may be necessary to open the appliance door, e.g. to turn the food over or to put in more food. In such an instance, operation is paused and the display shows instructions on what to do next. -
Page 42: Zug-Home
EasyCook menu. Any number of national cuisines can be activated. V-ZUG-Home Conditions The following conditions must be met for full use of V-ZUG-Home: ® ▪ Access to the internet and to Google Play Store / App Store ▪... -
Page 43: Initial Set-Up
Store or the App Store® for «V-ZUG». ▸ Install and open the V-ZUG App. Enabling the V-ZUG-Home mode on the appliance ▸ Set to the «Display» or «Operate and display» mode under «V-ZUG-Home» in the user settings. Connecting the appliance to the home network ▸... -
Page 44: Childproof Lock
7 User settings Childproof lock The childproof lock is to prevent children accidentally switching on the appliance. When the childproof lock is activated, the appliance can only be operated after first en- tering a code. The code is displayed in reverse order when unlocking. The childproof lock is activated within 1 minute of the appliance being switched off. -
Page 45: Assistance Functions
If set to «On», a short preheat tone is emitted when it is time to put the food into the cooking space. Date and time Time synchronization The «Internet» setting is set automatically when connecting to V-ZUG-Home. The time, date and time zone are then synchronized directly from the app. Date The date can be called up and changed. -
Page 46: V-Zug Home
V-ZUG Home Mode It is possible to choose between «Off», «Display» and «Operate and display». To connect the appliance to «V-ZUG-Home», «Display» or «Operate and display» must be selected. Displaying information Displays all relevant information for the connection. Restarting interface The interface can be reset if difficulties are experienced establishing a connection. -
Page 47: Customer Services
8 Care and maintenance Resetting Resets all EcoManagement counters except for total consumption. 7.13 Customer Services This part of the menu is intended for service staff and is password-protected. Care and maintenance Risk of burns from hot surfaces! Allow the appliance and the accessories to cool down before cleaning. Incorrect handling can result in damage to the appliance! Use soft cloths only. - Page 48 8 Care and maintenance Pyrolytic self-cleaning Risk of burns from hot surfaces! The appliance front gets hotter than during normal operation. There is likely to be some smoke given off for a short period of time so ventilate the room during pyro- lysis.
- Page 49 8 Care and maintenance The appliance door cannot be opened until the temperature has dropped below 300 °C. ▸ Wait until the appliance has cooled to hand warm to remove any residue left behind using a soft cloth dampened with water. Do not use cleaning agents. At the front of the cooking space is the door seal.
- Page 50 8 Care and maintenance Reinstalling the appliance door ▸ Push the appliance door 3 evenly into both hinges 1 as far as it will go. ▸ Open the appliance door as far as it will go and fold back the clips 2. –...
- Page 51 8 Care and maintenance ▸ Put the door glass 5 back in. To do this, insert the door glass 5 into the door frame and gently push it back towards the hinges. – The markings on the glass must be legible. ▸...
- Page 52 8 Care and maintenance Replacing the door seal We generally recommend the door seal be replaced by our service staff. However, you can also replace the door seal of your appliance yourself. We accept no liability for any damage caused by the door seal not having been fitted properly.
- Page 53 8 Care and maintenance Removing the door seal ▸ In each of the four corners, turn the seal out- wards by about 30° and carefully pull the clip out of the slot. ▸ When all four clips have been released, re- move the seal.
- Page 54 8 Care and maintenance Overhead illumination ▸ Carefully turn the glass light cover 1 clockwise and remove. ▸ Take out the faulty halogen light bulb. ▸ Carefully fit the new halogen light bulb. ▸ Turn the glass light cover 1 anti-clockwise to tighten.
- Page 55 9 Trouble-shooting Trouble-shooting You may be able to trouble-shoot the following malfunctions yourself. If not, note down the error message in full (message, F and E numbers) and call Customer Services. Error messages Message Possible cause Solution ▪ «FX/EXX» ▪ Various situations can ▸...
- Page 56 9 Trouble-shooting Other possible problems Problem Possible cause Solution ▪ Appliance is ▪ A household fuse or ▸ Change the fuse. not working circuit breaker has ▸ Reset the circuit breaker. tripped. ▪ The fuse or circuit ▸ Contact Customer Services. breaker keeps blow- ing.
- Page 57 10 Accessories and spare parts Problem Possible cause Solution ▪ Clock is not ▪ Irregular mains fre- ▸ Turn off the mains synchronization. running cor- quency rectly ▸ Connect the appliance to the internet. ▸ The time is automatically synchron- ized.
- Page 58 Own measurements can be im- precise and are not suitable for checking the accuracy of the temperature. 11.3 Product fiche In accordance with EU Regulation No.: 66/2014 Brand – V-ZUG Ltd Type of appliance – Oven Model designation – C4T | C4T...P...
- Page 59 12 Tips and tricks In accordance with EU Regulation No.: 66/2014 Measurement and calculation methods used – SN EN 60350-1:2016 Required to heat a standardized load per cavity Required to heat a standardized load per cavity Measurement methods: see EU Regulation No. 66/2014, Annex II, Chpt. 1 11.4 EcoStandby To prevent unnecessary energy consumption, the appliance is equipped with the auto-...
- Page 60 13 Disposal Result Solution ▪ The baking has come ▸ Check that the settings used correspond to those recom- out lighter on one mended in «EasyCook». baking tray than on the other. Some uneven browning is normal. More even browning is generally achieved at lower temperatures.
- Page 61 Index Baking tray............ 47 Cooking space.......... 47 3-point food probe........... 13 Door glass............. 50 Door seal............ 51 Shelf guides .......... 54 Accessories ..........12, 57 Cleaning the exterior ........47 Clock ..............27 Moving ............ 14 Hiding............. 27 App view ............10 Hiding during operation......
- Page 62 F and E messages .......... 55 Factory settings ..........46 Favourites............ 46 Notes ..............64 Pinned values .......... 46 Start screen........... 46 V-ZUG-Home.......... 46 Operating and display elements....10 Favourites ............23 Operating time..........17 Changing............ 23 Setting............ 17 Creating ............ 23 Operation............
- Page 63 Cancelling or switching off before time... 39 Adjusting............ 16 How it functions ........... 36 Saving ............ 16 Seared ............ 37 V-ZUG App ............43 Selecting and starting ......... 38 V-ZUG-Home Soft roasting table..........37 Spare parts ..........57, 58 Displaying information ........ 46 Special accessories .........
- Page 64 Notes...
- Page 67 V‑ZUG service centre. Technical questions, accessories, warranty extensions V-ZUG is happy to help you with any general administrative or technical queries, to take your orders for accessories and spare parts and to inform you about our progressive service agreements.
- Page 68 Place your finger on the CircleSlider Move app and move it in a circle. Page change Adjustable value Favourite Temperature The temperature can be set using the CircleSlider. 1094194-04 V-ZUG Ltd, Industriestrasse 66, CH-6302 Zug info@vzug.com, www.vzug.com...
Need help?
Do you have a question about the Combair V4000 60 and is the answer not in the manual?
Questions and answers