Table of Contents
Advertisement
INSTALLATION
The Tables come completely assembled and ready to use. Plug the cord into a functioning outlet that
is rated for the table. (See Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard and where the
controls are located to your liking and are conveniently accessible.
Be sure access to plug is not blocked for disconnecting the table from power.
GROUNDING
DANGER
Grounding for 120 Volt products:
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
shown below. See Grounding Methods - US 120V Example. Make sure that the product is connected
to an outlet having the same configuration as the plug. No adapter should be used with this product.
Grounding for 230 Volt products:
This product is rated for less than 15 amperes and is for use on a circuit having a nominal rating
of 230 volts and is factory-equipped with specific electric plug to permit connection to a proper
circuit. Make sure that the product is connected to an outlet having the same configuration as the
plug. No adapter should be used.
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet
only.
Grounding Methods - US 120V Example
Correct Implementation
Incorrect Implementation
4
Advertisement
Table of Contents
