Fantasea Line FG7X III R Instruction Manual page 20

eliminating shadowing effects and photographing in deep water, an accessory slave flash is eliminating shadowing effects and photographing in deep water,
recommended. For further information, please refer to the section "External Flashes" or further information, please refer to the section "External Flashes" or further information, please refer to the section "External Flashes".
2. In order to make use of the built In order to make use of the built-in camera flash, remove the Fiber Optic Cable Plate from the
housing. Insert your fingers beneath the adaptors installed inside the plate and nsert your fingers beneath the adaptors installed inside the plate and push the plate nsert your fingers beneath the adaptors installed inside the plate and
upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the
housing by the dedicated secure line in order to avoid losing it during the dive. housing by the dedicated secure
3. The removable flash diffuser included assists with
softening the built-in flash output, increasing its
angle of coverage and decreasing the amount of angle of coverage and decreasing the amount of
backscatter in the images (the unattractive
snowstorm effect of the flash reflecting off
suspended particles in the water). suspended particles in the water).
a. In order to install the flash diffuser, In order to install the flash diffuser, hold and
align it against the housing lens port so the align it against the housing lens port so the
concave side of the flash diffuser is facing concave side of the flash diffuser is facing
the lens port (Image #1 the lens port (Image #15).
b. Gently push the flash diffuser against the Gently push the flash diffuser against the
housing lens port till it clicks. housing lens port till it clicks.
c. Attach the flash diffuser quick release secure st Attach the flash diffuser quick release secure string to the other side of the string connected
to the housing in order to avoid losing the flash diffuser underwater. to the housing in order to avoid losing the flash diffuser underwater
d. In order to remove the flash diffuser from the housing, gently push it outwards first from its In order to remove the flash diffuser from the housing, gently push it outwards first from its In order to remove the flash diffuser from the housing, gently push it outwards first from its
top and then from the bottom. top and then from the bottom.
4. It is best to set the camera flash mode to "Flash Always" as o set the camera flash mode to "Flash Always" as artificial light is required in most
compositions for the purpose of color and light reproduction. This will ensure the compositions for the purpose of
flash fires on every image taken flash fires on every image taken regardless of ambient light available. Please refer to the
instruction manual for further instructions regarding such settings. instruction manual for further instructions regarding such settings.
5. Rotate the Flash Up Switch clockwise (pulling it toward the back of the housing) in order to pop up
the camera built-in flash.
6. Note that once the camera's buil Note that once the camera's built-in flash has been popped up it can be turned off using the
Right control and selecting the
have any effect on the built-in flash.
in order to avoid losing it during the dive.
included assists with
in flash output, increasing its
the unattractive
of the flash reflecting off
clockwise (pulling it toward the back of the housing) in order to pop up clockwise (pulling it toward the back of the housing) in order to pop up
in flash has been popped up it can be turned off using the Flash /
the "Off" option. Rotating the Flash Up Switch counterclockwise will not
in flash.
an accessory slave flash is
flash, remove the Fiber Optic Cable Plate from the
ring to the other side of the string connected
FG7X III R Housing Instruction Manual
20
Image #15
is required in most
nsure the built-in camera
Please refer to the camera
counterclockwise will not
Instruction Manual 20200220