Fantasea Line FG7X III R Instruction Manual page 17

4. If inserting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it serting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it serting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it
on the left side of the camera,
mounts, where it doesn't interfere with proper housing operation. where it doesn't interfere with proper housing operation. It is important to make sure
that the silica gel pack doesn't stick out, or else it might interfere with the watertight seal of the that the silica gel pack doesn't stick out, or else it might interfere with the watertight seal of the that the silica gel pack doesn't stick out, or else it might interfere with the watertight seal of the
housing.
5. If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing
the housing (see section "Hybrid Vacuum Safety System"). ousing (see section "Hybrid Vacuum Safety System").
, in the slot midway up between the two rubber shock absorber
17
Image #10
SIGNAL BOARD SIGNAL BOARD
Image #11 Image #
rubber shock absorber
It is important to make sure
FG7X III R Housing Instruction Manual Instruction Manual 20200220