Table of Contents
Advertisement
Assembling Your Rower
Step 3: Install the Console
A.
Remove the two pre-installed screws
B.
The Console Set is pre-assembled (5), place it on the top of Tank Frame(1).
C.
Connect the wires as shown above.
D.
Use Allen Wrench to attach the Console Set to the frame using four M8x15
Screws(9) and Flat Washers(11).
12
5mm Allen
Wrench
M8 x 15
M8 Washer
(x4)
(x8)
Advertisement
Table of Contents
