Page 1
Alliance Desk: Assembly Instructions At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on the production line Prior to starting the assembly process take all of the parts out of the box, remove plastic bags and lay the parts out on the floor to become familiar with the components.
Page 2
Desk is being attached to so there is a gap of approximately 16 in/41 cm between the two support brackets. E. Set the frame of the Alliance Desk into the support brackets (2) and line the attachment holes up on both sides. Install the two M8*45L...