Using the Setup Menu
IImage Adjustment
This sub-menu returns all of the sub-menu items on the Image Adjustment main menu to
their initial default settings.
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
"Image Adjustment" main menu "Vertical Position", "Horizontal Position", "Frequency", and
"Phase" settings are initialized for the current signal type (XGA/60Hz, UXGA/60Hz, etc.)
only.
For details about the initialization procedure, see "To initialize the settings of a particular
main menu item" on page 70.
Volume Adjustment
IVolume Adjustment
This sub-menu can be used to adjust the volume level of the projector's speaker. This setting
is also linked to volume settings made with the remote controller's [VOL +] and [VOL –] keys.
Changing this setting when there is no input signal changes the volume setting of the
currently selected signal source.
A different setting is stored for each input source.
IVolume Adjustment
This sub-menu returns Volume to its initial default setting.
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
Initialization is performed separately for each input source.
For details about the initialization procedure, see "To initialize the settings of a particular
main menu item" on page 70.
Restore Menu Defaults
Volume
Restore Menu Defaults
78