Using The Setup Menu; Setup Menu Overview - Casio XJ-350 User Manual

Using the Setup Menu

Using the Setup Menu
This section explains how to configure setup menu settings, and provides details about each
of the settings.

Setup Menu Overview

Pressing the [MENU] key while an image is being projected displays the setup menu on the
projected image. The setup menu can be used to configure a variety of different projector
settings. See the "Setup Menu Setting List" on page 62 for details about the settings that are
available.
Using the Setup Menu Setting List
The settings that can be configured and the settings that appear on the item depend on
the input source that is currently selected. Under "Input Source" in the following list, there
is a column for each of the input sources listed below. A "
the menu item to the left is displayed for that input source, while "
menu item is not displayed.
Column name:
R
C
S
V
No Signal
The "Sub-menu Item Type" column shows the type of the applicable sub-menu item. Refer
to the pages noted below for more information about each item type.
Value Setting: Specifies a numeric value (
Selection: Allows selection from multiple options (
Setting Screen: Numeric value specification or option selection on a separate setting screen
Execution: Initializes a setting (
Information: Displays information only (
The "See page" column shows where you should go for more information.
Input source:
RGB
Component
S-VIDEO
VIDEO
No signal being input
( page 68).
page 67).
page 67).
page 69).
page 69).
61
" in a column means that
" indicates that the