Table of Contents
Advertisement
Using the Setup Menu
IOperational Info
Scan System
This sub-menu item appears only when RGB or Component is the input signal, and shows
the scanning frequency of the input signal. The input signal is interlace or non-interlace for
RGB signal input, and interlace or progressive for Component signal input.
Restore All Defaults
IRestore All Defaults
Restore All Defaults
This sub-menu returns all of sub-menu items on all main menus to their initial default
settings. This operation can be performed regardless of the currently selected input source
and regardless of whether or not a signal is currently being input.
For details about this initialization procedure, see "To initialize all menu settings" on page 72.
100
Advertisement
Table of Contents
Troubleshooting
