Casio XJ-350 User Manual page 88

Using the Setup Menu
IInput Settings
When a computer is connected to the RGB input terminal, the projector automatically detects
the type of RGB signal being sent from the computer and projects the image. Some signals,
however, cannot be detected properly by the projector. When auto detection is not possible for
some reason, try using this setting for a computer signal with a resolution of SXGA (1280 ×
1024) or SXGA+ (1400 × 1050).
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
1280 × 1024: Specifies an SXGA (1280 × 1024) resolution RGB signal.
1400 × 1050: Specifies an SXGA+ (1400 × 1050) resolution RGB signal.
Setting Storage
This setting is saved for the RGB input terminal only.
IInput Settings
This sub-menu returns all of the sub-menu items on the Input Settings main menu to their
initial default settings.
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
Basically, initialization initializes the settings of the current input source. Note, however, that
the signal name indicator setting is always initialized, regardless of the currently selected
input source.
For details about the initialization procedure, see "To initialize the settings of a particular
main menu item" on page 70.
Special Signal
Available Items (Parentheses indicate defaults.)
(1280 × 1024), 1400 × 1050
None
* Only when the currently selected input source is RGB.
Restore Menu Defaults
88