Freezing The Projected Image (Freeze); Operating The Computer With The Remote Controller (Wireless Mouse) - Casio XJ-350 User Manual

Projection Operations

Freezing the Projected Image (FREEZE)

The freeze function stores the current projected image in projector memory, and projects it as
a still image.
To freeze the projected image
1.
On the remote controller, press the [FREEZE] key.
This freezes the image that was being projected when you pressed the [FREEZE] key.
2.
To unfreeze the image, press the [FREEZE] key again or press the
[ESC] key.
Operating the Computer with the Remote
Controller (Wireless Mouse)
You can use the remote controller as a wireless mouse to perform mouse operations on the
computer that is connected to the projector. Wireless mouse capabilities really come in handy
when you need to open a presentation software file for projection during a meeting or
presentation.
To use the remote controller as a wireless mouse, the computer must be connected to
the projector by the USB cable that comes with the projector. For details, see
"Connecting a Computer to the Projector's USB Port" on page 35.
Note that wireless mouse capabilities are available only when RGB is selected as the
input source and there is RGB input from the computer to the projector.
To operate the computer with the remote controller
1.
Use the mini D-Sub cable and USB cable that come with the projector
to connect the computer to the projector. After that, turn on the
projector and the computer.
See the following for more information.
Connecting a Computer to the Projector (Video and Audio) (page 34)
Connecting a Computer to the Projector's USB Port (page 35)
2.
On the remote controller, press the [RGB/COMPONENT] key to select
RGB as the input source.
You can also select the input source using the projector's [INPUT] key.
59