Using The Setup Menu (Menu); Basic Setup Menu Operations; Setup Menu Settings - Casio XJ-V1 User Manual

Using the Setup Menu (MENU)

Pressing the [MENU] key displays the Setup Menu shown below on the projection screen. You can
use this menu to adjust projected image brightness, contrast, and other settings, and to change
projector settings.
Menu Items
(Main Menu)
Highlighting
Guidance
The guidance shows the key operations that can be performed for the currently selected (highlighted)
menu item.

Basic Setup Menu Operations

To do this:
Display the Setup Menu
Exit the Setup Menu
Select a menu item
Configure the setting of a
menu item

Setup Menu Settings

One or more letters (such as RC) after the menu item name indicates an item that is available only
when one or more particular input source is selected. The letters indicate the input source(s) where
the menu item is available.
R: RGB input, C: Component input, H: HDMI (PC) input, D: HDMI (DTV) input
A menu item that does not have any letter after it will be available regardless of the input source.
The initial default setting is indicated by an asterisk (*).
Use this menu item:
Image Adjustment 1 3
Brightness
Image Adjustment 1 3
Contrast
Image Adjustment 1 3
Color Mode
Image Adjustment 1 3
Color Balance
Perform this operation:
Press the [MENU] key. Pressing the [MENU] key to exit the Setup Menu will save the
settings you configured while it was displayed.
Use the [ ] and [ ] keys to move the highlighting to the menu that contains the menu
item you want to select and then press the [ENTER] key. Next, use the [ ] and [ ]
keys to move the highlighting to the menu item you want to select.
If a menu item that has options or setting values to the right, use the [ ] and [ ]
keys to change the setting.
For a menu item that has "Modify [ENTER]" or "OK [ENTER]" to the right, press the
[ENTER] key to display a dialog box for configuring the setting.
To do this:
Adjust projected image brightness.
Adjust projected image contrast.
Select one of the following projected image color modes: "Standard*
2
"Theater* ", "Blackboard", "Natural".
*1 Initial default when RGB or HDMI (PC) is selected for input.
*2 Initial default when Component or HDMI (DTV) is selected for input.
Select one of the following color balance presets: "Warm", "Normal*", "Cold".
Also can be used to separately adjust red, green, and blue.
19
Menu Item
(Sub-menu)
1 ", "Graphics",