Table of Contents
Advertisement
"Display" switch-off status
To save energy, the display goes out
and the Start/Stop button flashes
slowly.
Changing this setting leads to increased
energy consumption.
- On after 10 min, not in current pro-
gramme (factory default)
The display will remain on during the
programme sequence but will go out
10 minutes after the end of the pro-
gramme.
- On after 10 min
The display will go out after
10 minutes.
Delay start
The type of time input for the delay
start function can be changed or
switched off.
- Off
The delay start function is not avail-
able for selection.
- End of programme (factory default)
With the delay start function, you
specify at what time the programme
should end.
- Beginning of programme
With the delay start function, you
specify at what time the programme
should begin.
- Time until start
With the delay start function, you
specify after how many hours a pro-
gramme should begin.
Supervisor level
Programme name
When selecting a standard pro-
gramme, the name of the selected
drying is shown in the display.
- Factory default: on
When a programme is selected, the
programme name is displayed for a
few seconds before the display
shows the main menu.
- Off
The main menu is displayed immedi-
ately.
71
Advertisement
Table of Contents
