Miele PDR 514 Operating And Installation Instructions
Commercial tumble dryers
Hide thumbs
Also See for PDR 514:
- Quick start manual (156 pages) ,
- Operating and installation instructions (38 pages) ,
- Operating and installation instructions (56 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele PDR 514
Summary of Contents for Miele PDR 514
- Page 1 Operating and installation instructions Commercial tumble dryers PDR 514/518/522/528/544 To avoid the risk of accidents or damage to the en-GB machine, it is essential to read these instruc- tions before it is installed and used for the first time. M.-Nr. 11 865 060...
-
Page 2: Table Of Contents
Contents Caring for the environment .................... Warning and Safety instructions ................... Appropriate use ......................... Foreseeable misuse......................Technical safety......................... Gas-heated tumble dryers .................... Correct use........................Accessories ........................Operating the tumble dryer .................... 11 Machines with residual moisture control (ROP) ..............11 Drying levels ........................ - Page 3 Contents Installation........................29 Installation requirements ....................29 General operating conditions .................... 29 Transport ........................... 29 Installing the tumble dryer....................29 Securing the machine......................31 Electrical connection ......................31 Supply air/exhaust air......................32 Steam connection (only for steam-heated variants)............32 Hot water connection (only for hot water-heated variants) ..........32 Gas connection (only for gas-heated variants)..............
-
Page 4: Caring For The Environment
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the man- ufacturing process and also reduces the amount of waste in landfill sites. -
Page 5: Warning And Safety Instructions
If using, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for dam- age resulting from incorrect or improper use or operation. -
Page 6: Foreseeable Misuse
Foreseeable misuse Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Do not lean on the tumble-dryer door. Otherwise, the tumble dryer may tip over, causing injury to yourself or others. - Page 7 The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a specialist. Miele cannot be held liable for the consequences of an inadequate earthing system.
-
Page 8: Gas-Heated Tumble Dryers
Ensure that no closeable door, sliding door or an oppositely hinged door is installed that would hinder the drum door being opened in any way. If the mains connection cable is faulty it must always be replaced by a Miele authorised technician to protect the user from danger. Gas-heated tumble dryers ... -
Page 9: Correct Use
Aggressive vapours containing chlorine can also be corrosive. Do not store containers of these agents near the tumble dryer. Accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. - Page 10 Warning and Safety instructions Miele cannot be held liable for damage caused by non-compliance with these Warn- ing and Safety instructions.
-
Page 11: Operating The Tumble Dryer
Operating the tumble dryer Machines with residual moisture control (ROP) Control field Sensor controls for the drying levels Status displays Light up when necessary. Sensor control For drying bedding. Time display Displays the remaining programme running time in hours and minutes. Sensor controls ... -
Page 12: Drying Programmes
Operating the tumble dryer Drying programmes - position = “Cottons” programme For drying cotton and linen fabrics. - position = “Cottons Low temperature” programme For drying delicate cotton and linen fabrics. - position = “Synthetics/Delicates” programme For drying synthetic fibres and artificial silk to 20 % residual moisture. - ... -
Page 13: Machines With Time Control (Top)
Operating the tumble dryer Machines with time control (TOP) Control field Sensor controls for the drying levels Status displays Light up when necessary. Sensor control For drying bedding. Time display Displays the remaining programme running time in hours and minutes. Sensor controls ... - Page 14 Operating the tumble dryer - position 60 = Timed programme 60 minutes - position = machine off...
-
Page 15: Machines With Payment Systems (Cop)
Operating the tumble dryer Machines with payment systems (COP) Control field Status displays Light up when necessary. Sensor control For drying bedding. Time display Displays the remaining programme running time in hours and minutes. Sensor controls For time selection. - Page 16 Operating the tumble dryer - position range = “high” temperature setting For drying cotton and linen fabrics. - position = machine off...
-
Page 17: How The Control Field Works
Operating the tumble dryer How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected. If a sensor control is dimly lit, this means it can be selected. Sensor controls for the drying levels After selecting a drying level programme with the programme selector, the recommended drying level lights up. -
Page 18: Initial Commissioning
Complete the initial commissioning process. During the initial commissioning process, you will need to define the settings for daily use of the tumble dryer. Some settings can only be modified during the initial commissioning process. After that, they can only be changed by the Miele Customer Service Department. -
Page 19: Drying
Drying 1. Notes on correct laundry care Washing Heavily soiled laundry must be washed particularly thoroughly. Use sufficient detergent and select a high wash temperature. If in doubt, wash the items several times. New, coloured items must be washed thoroughly and separately. Do not dry these items with light coloured garments. -
Page 20: Selecting A Programme
Drying Open the door. Load the laundry. Do not overload the drum. Overloading can cause unnecessary wear and tear to the laundry and cause a disap- pointing drying result. It can also cause more creasing. Closing the door ... -
Page 21: Time-Controlled And Other Programmes
Drying Touch the sensor control for the drying level you want. It then lights up brightly. The drying levels that are available for selection depend on the selected programme. Time-controlled and other programmes Warm air You can set the duration in one-minute increments from minutes to hours. ... -
Page 22: Starting A Programme
Drying Cancelling/deleting Delay start Turn the programme selector to the position. Alternatively, you can also cancel Delay start by opening the door. Delay start countdown - Delay start times of more than will count down in hours and then in minutes until the start of the programme. -
Page 23: End Of The Programme - Unloading The Drum
Drying 5. End of the programme – Unloading the drum End of programme The laundry will be cooled down shortly before the end of the programme. The laundry can now be unloaded. The programme has ended when only is left on the display. If Anti-crease (see “Programmable functions”) has been selected, the drum rotates in inter- vals. -
Page 24: Changing The Programme Sequence
Changing the programme sequence Changing a programme once it has started You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to cancel the current programme before you can select a new one. ... - Page 25 Changing the programme sequence Time remaining Altering the programme sequence can cause adjustments in the h min time remaining dis- play.
-
Page 26: Cleaning And Care
Cleaning and care Cleaning the fluff filter Risk of fire if the tumble dryer is operated without a fluff filter. If there is no fluff filter, the air channels, heating elements and vent ducting can become clogged during drying and may catch fire. The fluff filter must not be removed for cleaning. -
Page 27: Cleaning The Drum And The Outside Of The Casing
In the case of electrically heated tumble dryers, the heater bank and the heating shaft must also be checked by the Miele Customer Service Department. In the case of gas-heated dryers, the burner and the burner area must be checked. -
Page 28: Customer Service Department
Customer Service Department Optional accessories Optional accessories for this tumble dryer are available from your Miele Dealer or from the Miele Spare Parts Department. Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. -
Page 29: Installation
Installation Installation requirements The tumble dryer must only be installed and commissioned by Miele Customer Service Department or an authorised dealer. The tumble dryer must be installed in accordance with all relevant regulations and standards. The dryer must only be operated in a room that has sufficient ventilation and which is frost-free. - Page 30 Installation PDR 514/518/522/914/918/922 PDR 528/544/928/944 1400 mm 1640 mm 906 mm 1206 mm PDR 514/914: 852 mm PDR 528/928: 1018 mm PDR 518/918: 1035 mm PDR 544/944: 1384 mm PDR 522/922: 1164 mm To facilitate any future maintenance work, a maintenance corridor with a width of at least 500 mm must be set up behind the machine and must be accessible at all times. The distance between the machine and any walls must not fall below the specified minimum values.
-
Page 31: Securing The Machine
If more than one voltage is specified on the data plate, the tumble dryer can be conver- ted for connection to the relevant input voltage. This conversion must be performed by the Miele Customer Service Department or by an authorised dealer. During the conversion, the wiring instructions given on the wiring diagram must be followed. -
Page 32: Supply Air/Exhaust Air
The gas heating is configured at the factory in line with the gas specifications on the sticker on the rear of the appliance. If the gas family is changed, a conversion kit must be requested from the Miele Cus- tomer Service Department (please specify the appliance type, serial number, gas family, gas group, gas connection pressure and country of installation). - Page 33 Installation Risk of electric shock and injury due to using the tumble dryer without the complete casing. If the casing is dismantled, it is possible to come into contact with live or rotating ma- chine parts. Once the tumble dryer has been installed, replace all the casing parts that were re- moved.
-
Page 34: Optional Accessories
Optional accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. XCI box The optional XCI box allows external hardware from Miele and other suppliers to be con- nected to the Miele Professional machine. -
Page 35: Technical Data
Sound power level, EN ISO 9614-2 <80 dB(A) EU declaration of conformity Miele hereby declares that this PT 013 tumble dryer complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following Internet addresses: - Under “Products”, “Download” at www.miele.de/professional/index.htm - Or go to http://www.miele.de/professional/gebrauchsanweisungen-177.htm and enter... - Page 36 United Kingdom Malaysia Miele Sdn Bhd Miele Co. Ltd., Fairacres, Marcham Road Suite 12-2, Level 12 Abingdon, Oxon, OX14 1TW Menara Sapura Kencana Petroleum Professional Sales, Tel: 0845 365 6608 Solaris Dutamas No. 1, Jalan Dutamas 1 E-mail: professional@miele.co.uk 50480 Kuala Lumpur, Malaysia Internet: www.miele.co.uk/professional...