Supervisor level
WiFi / LAN
Control the networking of your tumble
dryer.
- Setup
This message only appears if the
tumble dryer has not yet been con-
nected to a WiFi network.
- Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
- Activate (visible when the network is
deactivated)
The WiFi function is reactivated.
- Connection status (visible when the
network is activated)
The following values are displayed:
– The quality of WiFi reception
– The network name
– The IP address
- Reset (visible when set up)
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
- Reset (visible if already set up)
The network is no longer set up. A
new connection has to be estab-
lished in order to use the network
again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default setting
74
WiFi setup
There are 2 possible connection meth-
ods.
WPS
Activate the WPS function on your
router within 2 minutes.
Tip: If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
Soft AP
Activate the function with the Miele
app on your smart device within
10 minutes.
Tip: The app will guide you through the
remaining steps.