Table of Contents
Advertisement
Installation
Ensure that no closeable door, slid-
ing door, or an oppositely hinged
door is installed that would hinder
the door of the tumble dryer being
opened in any way.
Levelling the tumble dryer
The appliance must stand perfectly
level on all four feet to ensure safe and
proper operation.
The screw feet can be adjusted to com-
pensate for unevenness in the floor.
This tumble dryer is not suitable for
building under.
Never block the ventilation slots on
the tumble dryer. Do not block the
gap between the bottom of the
tumble dryer and the floor with plinth
facings, deep pile carpet etc. This
would hinder a sufficient flow of air
to the tumble dryer.
Damage caused by incorrectly
installed or missing ducting.
Moist air from the tumble dryer can
cause damage in the room where the
appliance is installed.
Please observe the instructions in
"Installation of the ducting".
External control equipment
An optional accessory unit has to be
purchased to set up a connection with
external systems:
- XCI box communication module
(e.g for peak load control units or
payment systems)
- XCI-AD communication adapter (for
payment systems only)
Payment systems
This tumble dryer can be fitted with a
payment system (optional Miele ac-
cessory). In this case, a Miele Service
technician must programme the relev-
ant settings in the tumble dryer's elec-
tronics and connect the payment sys-
tem.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.
Installation
53
Advertisement
Table of Contents
