Table of Contents
Advertisement
Initial commissioning
Setting up a payment system
This option allows you to set up an ex-
isting payment system.
If you do not wish to set up a payment
system:
No payment
system
Payment
Programme
system
control
Touch the
No payment system
control.
Continue reading from "Completing
the commissioning process" under
"Initial commissioning".
If you wish to set up a payment system:
These settings can only be changed
during the initial commissioning pro-
cess. If you wish to change the settings
after the commissioning process,
please contact Miele Service.
Touch the sensor control re-
peatedly until the setting you require
appears.
Touch the sensor control for the set-
ting you want.
The process for setting up a payment
system is described under "Payment
systems" in the chapter "Supervisor
level".
Completing the commissioning
process
The commissioning process is com-
plete when a programme lasting longer
than 20 minutes has been carried out in
full.
26
If the power is interrupted prior to the
start of the first drying programme
(e.g. if the machine is switched off
with the button), the initial commis-
sioning process can be completed
again. Once a drying programme has
been running for over 20 minutes, the
initial commissioning process cannot
be performed again.
Turn the programme selector to .
Timed drying cool air
sensor
Touch the sensor control.
Duration
Touch the sensor control in the top
right until
Touch the
Touch the flashing Start/Stop sensor
control.
After this programme has finished, the
tumble dryer is ready for use.
0:10
0
:
20
0:20
appears.
sensor control.
OK
0:10
h
h
OK
Advertisement
Table of Contents
