Download Print this page

Inverter Charger - Samlexpower Evolution Series Quick Start Manual

Hide thumbs Also See for Evolution Series:

Advertisement

EVO INVERTER/CHARGER |
7.
Determine whether the optional EVO-RC remote control is necessary for
your application
• The Optional EVO-RC Remote Control provides useful functional information such as
battery voltage, battery charging status, and AC output power. EVO-RC Remote Control
is also capable of logging events to an SD card to create a history record of usage and
performance.
• EVO-RC Remote Control is required to adjust any of the programmable parameters
to customize its functionality to your specific requirements. For all programming
instructions, please refer to the EVO-RC Owner's Manual
• If the factory defaults are adequate for your requirements or once parameters are
adjusted to meet your requirements, it is not necessary to keep the EVO-RC attached
to the EVO
• If the user would like to have the EVO-RC Remote Control installed, there is a 1:1
wall cutout template in the EVO-RC box for a flush mounted installation with basic
installation instructions.
WARNING!
If there are any items in Sections 1, 2 or 3 of the Owner's Manual that you do not understand, do not attempt to
install the unit yourself. For a safe and code compliant installation, please consult a Certified Electrician that is
familiar with Local and National electrical codes.
All electrical systems both DC and AC must be disconnected from the source during the installation. Use of
isolated tools is recommended.
8. You are now ready to install the EVO
• Re-read Section 3, starting page 34 of the EVO
• Mount the EVO
• Mount, cable, and attach the optional EVO-RC Remote Control, if desired
• Install AC Input and AC output wiring and breakers
• Install the battery bank in the planned configuration
• Connect the battery bank to the EVO
• Recheck all wiring, grounding, and connections
9. If all wiring, grounding, and connections are correct, complete the installation
• Tighten cable glands
• Install DC terminal covers
• Replace AC access cover
• Place DC fuse in fuse holder. When placing this fuse a spark can occur.
• Switch on the DC
• Switch on the AC
8 | SAMLEX AMERICA INC.
Inverter Charger to maintain functionality.
TM
in the planned location
TM
Quick Start Guide

Inverter Charger

TM
Owner's Manual
TM
Inverter Charger
TM

Advertisement

loading

This manual is also suitable for:

Evo-2212Evo-3012Evo-2224Evo-4024