Table of Contents
Advertisement
Figure 37 System > Restore/ Firmware Upgrade > Firmware Upgrade
The following table describes the labels in this screen.
Table 26 System > Restore/ Firmware Upgrade > Firmware Upgrade
LABEL
File Path
Upload
Note: Do not turn off the WAP6807 while firmware upload is in progress!
Wait until the firmware upload process is complete.
The WAP6807 automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 38 Network Temporarily Disconnected
After the WAP6807 restarts, log in again and check your new firmware version in the Status screen.
7.6 Restart Screen
System restart allows you to reboot the WAP6807 without turning the power off. Click Reboot to have the
WAP6807 restart. This does not affect the WAP6807's configuration.
Click System > Restart to open the following screen displays.
Figure 39 System > Restart
Chapter 7 System
DESCRIPTION
Click Choose file to find the.bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
WAP6807 User's Guide
64
Hide quick links:
Advertisement
Table of Contents
