Mpro Mesh Network Setup - ZyXEL Communications WAP6807 User Manual

Look for the device with a red WiFi icon (
2
Tap the refresh button at the top right corner (
3
WiFi icons in front of your devices should be green (
locations.

3.6 MPro Mesh Network Setup

Configure your MPro Mesh router with a WAP6807 using a WiFi connection, see
for more information.
In the figure below, A is a Zyxel router that supports MPro Mesh. The WAP6807 that is acting as a
Repeater is letting a wireless client connect to the network wirelessly through a router. See
page 10 for more information on WAP6807 network scenarios.
Figure 19 WAP6807 with a WiFi Connection
Configure your non-MPro Mesh Router with a WAP6807 using a wired connection, see
page 28 for more information.
In the figure below, A is a Zyxel router that does not support MPro Mesh. The WAP6807 that is
an AP is bridging a wired network and a wired LAN in the same subnet.
10 for more information on WAP6807 network scenarios.
Figure 20 WAP6807 with a Wired Connection
Chapter 3 App Tutorials
) in front of it. Move the device closer to the router.
) to check the updated status of your devices. The
) or amber (
WAP6807 User's Guide
26
) if they're placed in appropriate
Section 3.6.1 on page 27
Section 1.2 on
Section 3.6.2 on
acting as
See Section 1.2 on page