Alpha-InnoTec HT 6Split Installation And Operating Manual page 61

Select a different file
Select "select a different file" if you do not want to
use the suggested software. When you scroll through
the files, information about the selected software is
shown in a fact box just as before. Once you have
selected a file with the OK button, you will return to
the previous page (menu 7.1) where you can choose
to start the update.
Menu 7.2 - Logging
activated
floor drying logging activated
interval
Setting range: 1 s – 60 min
Factory setting range: 5 s
Here you can choose how current measurement val-
ues from the controller should be saved onto a log file
on the USB memory stick.
1. Set the desired logging frequency.
2. Select "on".
3. The present values from the controller are saved
in a file in the USB memory stick at the set interval
until "on" is unticked.
IMPORTANT
Before removing the USB memory stick, remember to
untick "On".
HT 6Split
HT 12Split
update firmware 7.1
logging 7.2
5
sec
Menu 7.3 - Manage settings
save settings
recover settings
Here you can manage (save or reset) all the user set-
tings (user and service menus) in the controller from
the USB memory stick. With "save settings" you save
the menu settings to the USB memory stick in order
to restore them later or to copy the settings to another
controller.
IMPORTANT
When you save the menu settings to the USB memory
you replace any previously saved settings on the USB
memory.
With "reset settings" you delete all menu settings
from the USB memory stick.
IMPORTANT
Deletion of the menu settings from the USB memory
cannot be undone.
manage settings 7.3
Chapter 10 |
Service 61