Alpha-InnoTec HT 6Split Installation And Operating Manual page 5

Waste disposal
Disposal of the packaging
shall be the responsibility
of the installation techni-
cian installing the product,
or a special waste man-
agement facility.
Do not dispose of decommissioned
products together
Installation acceptance
The heating system must be accepted before start-up. Acceptance must be done by a person with appropriate
qualifications. Complete the card in the operating manual by entering the installation data.
CHECKLIST
Description
Heating medium
Installation rinsing
Installation venting
Diaphragm expansion vessel
Particulate filter
Safety valve
Cut-off valves
Pressure in the heating system
Connection according to the drawing
Hot water
Cut-off valves
Mixing valve
Safety valve
Power supply
Communication connection
Circuit fuses
Fuses, internal module
Building fuses
Temperature sensor outdoor
Room sensor
Energy meter
Emergency switch
Switch differential
Thermostat emergency mode setting
Miscellaneous
Connected to
HT 6Split
HT 12Split
with regular
Notes
household wastes. Hand them over
to a specialist facility dealing with
waste disposal or salesperson of-
fering such services.
Incorrect disposal of the product by
the user is subject to administrative
penalties under applicable regula-
tions.
Signature Date
Chapter 1 |
Important information 5