Table of Contents
Advertisement
4. Connect the fan power connector. Gently plug the fan power connector from the fan
assembly to the card.
5. Attach the fan assembly to the card. Angle the fan assembly so the notch (circled in the
image) goes under the card shroud. While holding onto the edge of the metal fan mounting
bracket, push the fan assembly down until it is firmly attached. When attached, it is held in
place by the metal fan assembly bracket.
UG1531 (v1.0) March 4, 2022
VCK5000 Hardware Install Guide
Appendix A: Fan Assembly Removal and Installation
Metal Fan Assembly Mounting Bracket
X25843-030322
www.xilinx.com
Send Feedback
X25842-030322
33
Advertisement
Table of Contents
