Chapter 2 Installation And Connections; Installation; Hard Disk Installation - HIKVISION DS-7700NXI-I Series Quick Start Manual

Chapter 2 Installation and Connections

Installation

During installation of the NVR:
Use brackets for rack mounting.
Ensure ample room for audio and video cables.
When routing cables, ensure that the bend radius of the cables are no less than five times
than its diameter.
Connect the alarm cable.
Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
Ensure the NVR is grounded.
Environmental temperature should be within the range of -10° C to +55° C (+14° F to +131° F).
Environmental humidity should be within the range of 10% to 90%.

Hard Disk Installation

Purpose
The following section introduces the HDD installation.
Before you start
Disconnect the power from the NVR before installing a hard disk drive (HDD). A factory
recommended HDD should be used for this installation.
Tools Required: Screwdriver.
Remove the cover from device by unfastening the screws on panels.
Connect the data cable and power cable.
Network Video Recorder Quick Start Guide
Remove Cover
11