Network Settings; Add Ip Cameras - HIKVISION DS-7700NXI-I Series Quick Start Manual

Network Settings

Purpose
Network settings must be properly configured before you operate device over network.
Go to System > Network > TCP/IP.
Select the General tab.
In the General Settings interface, you can configure the following settings: NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain
an IP address and other network settings from that server.
After having configured the general settings, click the Apply button to save the settings.

Add IP Cameras

Purpose
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated.
Network Video Recorder Quick Start Guide
Network Settings
20