Table of Contents
Advertisement
Onboard Peripheral Configuration
Floppy Disk Controller..............[Enabled ]
IDE Controller......................[Both
PS/2 Mouse Controller...............[Enabled ]
USB Host Controller.................[Enabled ]
USB Legacy Mode..................[Disabled]
Ø Onboard Serial/Parallel Port Settings
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk
controller.
IDE Controller
Set this parameter to
controller;
Both
to enable both primary and secondary IDE controller;
or
Disabled
to disable all IDE controllers.
PS/2 Mouse Controller
This parameter enables or disables the onboard PS/2 mouse
controller.
USB Host Controller
This parameter lets you enable or disable the USB controller on board.
When enabled, it activates the USB function of the system. When
disabled, it also deactivates the function.
BIOS Utility
® ¬ = Change Setting, F1 = Help
Primary
to enable only the primary IDE
Page 1/1
]
2-31
Advertisement
Table of Contents
