Table of Contents
Advertisement
IRQ
This function lets you assign an interrupt for serial port 1 and 2. The
options for serial port 1 are IRQ
are IRQ
3
and
10
.
The Base Address and IRQ parameters are
configurable only if Serial Port 1 and/or 2 is
enabled.
This parameter allows you to enable or disable the parallel port.
Base Address
This function lets you set a logical base address for the parallel port.
The options are:
·
3BCh
IRQ
This function lets you assign an interrupt for the parallel port. The
options are IRQ
5
and
7
The Base Address and IRQ parameters are
configurable only if Parallel Port is enabled.
If you install an add-on card that has a
parallel port whose address conflicts with the
parallel port onboard, a warning appears on
the screen.
Check the parallel port address on the add-on
card and change the address to one that
does not conflict.
2-34
4
and
11
. The option for serial port 2
PARALLEL PORT
·
378h
.
·
278h
User's Guide
Advertisement
Table of Contents
