Table of Contents
Advertisement
3.
Highlight the Setup Password parameter and press the
key. The password prompt appears:
4.
Type a password. The password may consist of up to seven
characters.
Be very careful when typing your password
because the characters do not appear on the
screen.
5.
Press
. A prompt asks you to retype the password to verify
your first entry.
6.
Retype the password then press
After setting the password, the system automatically sets the
Setup Password parameter to
7.
Press
to exit the System Security screen and return to the
Main menu.
8.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
9.
Select
Yes
to save the changes and reboot the system.
10. While rebooting, turn off the system then open the housing.
11. Set JP10 to
1-2
to enable the password function.
The next time you want to enter the BIOS utility, you must key in your
Setup password.
BIOS Utility
.
Present
.
or
2-23
Advertisement
Table of Contents
